ISSUE 74

 Return to the BUILD


“This [issue] includes the third large exterior panel for R2-D2’s body, which connects to the ones you assembled in [Issue] 70. Before joining the sections, it’s time to add the details provided with this [issue].”

 

Contents


Parts

Magazine

  • Building The Galaxy – Characters and Costumes
  • Droid Directory – R2-D2 Astromech Part 1
  • Understanding Robotics – Forestry Robots
  • Build R2-D2: Model Instructions

Build


Fitting the Side Details

Steps 1-3

Press the posts of the Shoulder Seal firmly into these holes:

Steps 3-6

Align the two notches of the Side Internal Plate with the two tabs of the Side External Grille and press together. The two lugs should fit up through the holes, as shown:

Steps 7-8

Fit the tabs and posts of this assembly into the matching slots of the Left Side Body Panel and press it all into place:

Step 9

Secure this into place from behind the panel with two (2) 2×4 mm black screws:

Steps 10-12

Align the four posts of the Rear External Grille with the holes/notches of the Rear Internal Plate, and press them together as shown:

Steps 13-14

Fit this assembly into the Left Side Body Panel as shown, aligning the posts to the holes:

Step 15

Secure this into place from behind the panel with four (4) 2.3×6 mm black screws:

Joining the Rear Panels

Step 1

Align the three Panel Connectors to these matching posts along the side of the Left Side Body Panel, with the arrows on the Panel Connectors facing AWAY from the panel as shown:

Steps 2-4

Secure the Panel Connectors to the posts on the back of the panel using three (3) 2.3×6 mm black flanged screws, one for each:

Steps 5-6

Retrieve your body panel assembly from Issue 72. Fit these two panels together, aligning all three connectors and posts as shown:

Steps 7-8

Secure the Panel Connectors to the second panel with three (3) 2.3×6 mm black flanged screws:

Thoughts


The rear body panel section of R2-D2 is now complete (minus a few plugs for the screw holes). We return to the internal ring frame in the next issue and start on the front body panels in Issue 76. Everything is plastic in this issue.

Next Up


 Issue 75 – Middle Ring Sections, Ring Connectors

Leave a Reply

Your email address will not be published. Required fields are marked *

Building the 1:2 scale Star Wars R2-D2 from DeAgostini