Return to the BUILD
“This [issue’s] parts enable you to continue trimming the inside of R2-D2’s left leg, and to prepare one of the displays that will fit into his dome. You will use the shoulder fitting and dome panel later on in the assembly.”
Materials: The Dome Frame and Shoulder Fitting are metal, while the plugs are soft rubber.
- Building The Galaxy – Shooting for Visual Effects
- Droid Directory – DB-3000 Luxury Droid/FA-4 Pilot Droids
- Understanding Robotics – Robotics in China
- Build R2-D2: Model Instructions
Fitting the Display Cable
Retrieve the Logic Function Displays assembly we built back in Issue 22. If the test lead is still attached, remove it. Then, attach the smaller end of the Cable for Logic Function Display in this issue to the back of the display:
Fitting the Plastic Plugs
Separate all of the Plastic Plugs from the sprues.
Push the ten (10) Plastic Plugs into these holes on the back of the left leg assembly:
The left leg is almost complete! The plugs are all plastic. The Dome Frame (used in Issue 62) and Shoulder Fitting are metal, but are not used in this issue. The Logic Function Displays assembly will be attached in Issue 64. The Shoulder Fitting will be installed much later in Issue 85. Keep all of these parts safe until then.
Issue 61 – Dome Panels, Shoulder Fitting, Plugs